<pre id="dxxnr"><track id="dxxnr"><progress id="dxxnr"></progress></track></pre>

              <track id="dxxnr"></track>

                <cite id="dxxnr"><rp id="dxxnr"></rp></cite>

                <mark id="dxxnr"><noframes id="dxxnr"><mark id="dxxnr"></mark>
                <b id="dxxnr"><ins id="dxxnr"><p id="dxxnr"></p></ins></b>

                    <mark id="dxxnr"></mark>

                    详细说明

                    SZE-24YCA 2

                    收藏
                    • 产品说明

                    20170314185382508250.jpg

                      本機特點:

                      PLC控制,油馬達預塑,全液壓驅動,自動循環;

                      塑化能力高,塑化溫度可預選自控。

                      采用24點計量,使用時根據各工位模具要求,選定注射量。

                      設有空模選擇功能。采用變頻轉位。

                      采用單缸直拉雙聯板剪式合模機構。

                      設有二次壓力注射。設有先后壓楦,合模順序的選擇功能。

                      圓盤轉位平穩,快慢調整方便。

                      圓盤轉位與塑化,注射工作供油分開控制。

                      工位多,定型時間長,易保證鞋底成型質量。

                      可選配伺服節能系統, 可節省電量30%左右。

                      Structure characteristics:

                      PLC controlled,pre plasticized by hydraulic motor,driven by full hydraulic pressure,and cycled automatically.

                      High plastifying capacity,the plastifying temperature can be controlled automatically by preselection.

                      It adopts 24 points measuring and the injection volume can be chosen according to the requirements of the moulds at each working position.

                      The function of empty mould selection has been provided.

                      Parallel mould plate closing mechanism is adopted,which linked with a toggle system operated by single cylinder.

                      The machine is equipped with two time pressure injection system and the cramp pressing and mould closing order selecting function.

                      The round table indexes smoothly and it’s movement can easily be adjusted.

                      The round table rotation,plasticizing and oil supply for the injection are controlled independently.

                      There are many working positions,the time for setting is longenough,andguarantees the setting quality of shoe soles.

                      Selecting servo energy conservation system to save about 30% energy.

                      主要技術參數:

                    項目/ITEM

                    單位/UNIT

                    規格/SPECIFICATION

                    SZE-24YCA

                    2SZE-24YCA

                    工位數        Number of stations

                    Station

                    24

                    24

                    螺桿直徑      Screw Diameter

                    mm

                    75

                    75 ,70

                    螺桿轉速      Screw rotating speed

                    r/min

                    0-160

                    0-160

                    螺桿長徑比    Screw length and diameter ratio


                    19:1

                    19:1 , 18:1

                    最大注射容積  Max injection capacity

                    cm3

                    660

                    660 ,580

                    塑化能力      Plastifying capacity

                    g/s

                    40

                    40

                    注射壓力      Injection pressure

                    Mpa

                    5.0

                    5.0

                    圓盤壓力      Disc pressure

                    Mpa

                    3.0

                    3.0

                    合模方式      Clamp mould style


                    剪式/Scissors

                    剪式/Scissors

                    提楦行程      Last trip

                    mm

                    60

                    60

                    鞋楦高度      Shoe cramp height

                    mm

                    210-260

                    210-260

                    ?虺叽      Mould frame dimensions

                    mm(LxWxH)

                    340x180x60

                    340x180x60

                    電機功率      The motor power

                    KW

                    21.5

                    36.5

                    整機外形尺寸  Outline dimensions of the whole machine

                    mm(LxWxH)

                    7300x3940x1955

                    8400x6800x1955

                    整機重量      Total weight of the whole machine

                    kg

                    13500

                    15500

                      以上技術規格僅供參考,如有任何變更或修改,恕不另行通知。

                      Technical specifications are indicative.Machines may undergo variations and/or modifications whithout any previous notice.

                    咨詢電話:0711-3355178

                    地址:鄂州市凡口經濟開發區順合路42號

                    微信二維碼

                    公眾號

                    技术支持: 萬家推云平臺 | 管理登录
                    ×
                    seo seo
                    久久婷婷欧美性爱,aⅴ成年女人毛片免费观看,免费jlzzjlzz在线播放欧美,国产手机在线亚洲精品观看

                        <pre id="dxxnr"><track id="dxxnr"><progress id="dxxnr"></progress></track></pre>

                                <track id="dxxnr"></track>

                                  <cite id="dxxnr"><rp id="dxxnr"></rp></cite>

                                  <mark id="dxxnr"><noframes id="dxxnr"><mark id="dxxnr"></mark>
                                  <b id="dxxnr"><ins id="dxxnr"><p id="dxxnr"></p></ins></b>

                                      <mark id="dxxnr"></mark>